|
Video System: PAL Colour fully
compatible with Australian TV System.
Image
Sensor:
Sharp
976(H) x 582(V)
568 032 active Pixel
CCD (960H)
⅓"
Charge Coupled
Device.
Lens:
Variable Focal Length
IR focus-shift corrected
2.8 ~ 12mm Automatic Iris
with external Focus & Focal Length adjusters,
copes with High levels of illumination, passes more light and
provides greater depth-of-field than ordinary fixed Iris Lenses.
There are no
optional Lenses for this Camera,
security camera lens information.
Scanning System: 2 : 1 Interlace, PAL
50 Hz vertical, 15 625 Hz horizontal.
Synchronisation: Internal.
Video Output: 1.14 V p-p Composite
Video 75 ohms, suit Australian TV, VCR, AV & Video inputs, BNC
socket on ~ 70 cm cable,
suitable for TV, DVR, VCR, AV & Video inputs in Australia, NZ, UK,
etc.
Horizontal
Pixels: 960 +
this
value is provided for comparative purposes only. Better than
Super-VHS resolution better than DTV / DVD (720 pixel) resolution.
650+ HTVL-E Resolution:
Whitepapers:
HTVL Effective Specification &
Camera Resolution Is Limited to 540 HTVL Maximum in CCTV Systems
Sensitivity: ~ 0.5 lux @ F1.2 in
Night mode 10 IRE (this value is approximate and provided for
comparative purposes only), 0 lux with LEDs 'ON'. Depending on Lens
'focal length' setting the Infrared LEDs illuminate up to ~ 80% of
the Width-of-Vision and are effective up to ~ 30 metres depending on
the Infrared reflective characteristics of subject.
Light Emitting Diodes: Twenty Four
Hi-Power ~ 850 nm wavelength Infrared, these produce a dull Red
visible glow. Automatic Light Sensor switches LEDs On/Off (~3/5 lux)
depending on light level.
Movable Infrared Optical Filter:
In Day mode (well lit, colour) mechanism
automatically positions IR-CUT optical filter between Lens
and Image Sensor to exclude Infrared radiation that would otherwise
adversely affect colour reproduction, this ensures
colour rendition not possible with ordinary non-filtered or
notch-filter type Day/Night cameras.
more
In Night mode (low light, monochrome)
mechanism automatically removes IR-CUT
optical filter to allow Infrared radiation to pass boosting low
light and Infrared sensitivity, the result is significantly better
night images using inbuilt
Infrared Illuminator or with Infrared rich
light sources.
Infrared Response
without Infrared filter is ~ 700 to ~
1100 nm better than a
'CCTV
notch IR Filter',
additional
CCTV Infrared Night Vision information.
Automatic Electronic Shutter (AES):
Automatic 1/50 to 1/100 000 second. Use 20 ms (1/50) shutter speed
to minimise smear, smear increases with increasing Shutter Speed,
additional
CCTV Automatic Electronic Shutter information.
Spectral Response:
~ 400
to ~ 1100 nm with Infrared 'CUT' Filter 'out' of optical path,
additional
CCTV Infrared Night Vision information.
Signal
to Noise ratio (SNR): 50 +dB, measured with AGC off.
Automatic Gain Control (AGC): Yes.
Back Light Compensation (BLC): Yes.
Gamma: 0.45.
White Balance (WB): Automatic.
Power Requirements: 12 VDC
Regulated, ~ 200 mA LEDs Off, ~ 500 mA LEDs On, via
2.1 x 5.5 mm DC socket, center pin =
(+),
~ 70 cm Cable.
Consider cable resistance when
installing, ask us about solutions if voltage drop is a problem with
existing wiring.
Dimensions (mm): ~ 275 x
85 x 110.
Mass (grams): ~ 1100,
Sunshade ~ 80.
Manufacturer:
18+ years experience. ISO 9001, CE, FCC, RoHS certification. OEM &
ODM supplier.
Made in China.
|