Colour
Rear Vision 5.6" Flat Panel Display & Waterproof Camera suitable for
general CCTV Observation and Monitoring, also suitable for Rear Vision or
Observation / Inspection Systems in: Automobiles - Tractors - Buses - Cranes -
Dozers - Boats - Aircraft - Trains - Harvesters and other machinery and
equipment used in the Agricultural, Earthmoving, Transport and other industries.
Cat
Code: RearView-C5.6
Colour Rear Vision
5.6" Flat Panel Display & Waterproof Camera suitable
for general CCTV Observation and Monitoring, also suitable for Rear Vision or
Observation / Inspection Systems in: Automobiles - Tractors - Buses - Cranes -
Dozers - Boats - Aircraft - Trains - Harvesters and other machinery and
equipment used in the Mining, Agricultural, Earthmoving, Transport and other
industries.
$ ? (Gold)
click here for
details $809 (A) Incl Tax
$899 (B) Incl Tax
Pictured with Accessory
Desk-Top Stand. Normal or Reverse (Mirror) Image. Two Video Camera & one VCR
inputs. Manual/Automatic Switching.
CAMERA:
Image Sensor:
1/4 inch Charge Coupled Device (CCD), Digital Signal Processing (DSP).
Elements: 500 (H) x 582 (V).
Resolution: ~ 440 Horizontal Lines.
Sensitivity: ~ 0.5 lux @ F1.2.
Automatic Electronic Shutter: 1/50 ~ 1/100 000 second.
Output: Standard PAL 75 ohm Composite Video via 4 pin S-Video (Y/C) Mini DIN
Plug on ~ 500 mm cable.
Lens: 2.9 mm Focal Length, F2.0.
Approximate Width of Vision:
@ 1 metre
@ 3 metres
@ 4 metres
@ 5 metres
2.9 mm Lens
1.1 metres
3.3 metres
4.4 metres
5.5 metres
Power Requirements:
12 Volts DC Regulated (from Monitor) via 4 pin S-Video (Y/C) Mini DIN Plug on ~
500 mm cable.
Dimensions:
28 mm diameter, 86 mm long, ~ 100 grams including cable & plug.
Other:
Waterproof Housing: Aluminium, Black anodised, threaded section ~ 35 mm long
from ~ 10 mm behind Front Flange, 1/4" UNC tapped thread centrally located
at end.
Supplied with:
Eight Spacers & Angled Rings, Two knurled Ring Nuts & Rubber Seal Ring
to mount & Aim camera. Cable ~ 20 metres with 4 pin Mini DIN Plug &
Socket for Monitor & Camera.
Picture displayed has been adversely affected by
illumination / reflection from Electronic Flash Lamps.
MONITOR:
Display Type:
Active Matrix Thin-Film-Transistor (TFT) Stripe Array, Normal or Mirror Image.
Picture Elements: 960 (H) x 234 (V).
Dot Pitch: 0.12 mm (H) x 0.36 mm (V).
Active Area: 115.2 mm x 84.2 mm. Sensitivity: ~ 0.5 to 2.0 v p-p, Negative Sync.
Inputs:
2 std PAL 75 ohm Composite Video via 4 pin S-Video (Y/C) Mini Din sockets at
rear.
1 std PAL 75 ohm Composite Video & Line-Level Audio via 3.5 mm Stereo Phono
socket on Right side.
10 ~ 26 VDC via 2.1 x 5.5 mm DC Socket on Right side.
10 ~ 26 VDC via 4 Pin socket at rear, with Automotive Reverse Gear (+) input to
power-on in Reverse only.
Outputs:
1 std PAL 75 ohm Composite Video & Line-Level Audio via 3.5 mm Stereo Phono
socket on Right side.
12 Volts DC Regulated for Cameras via 4 pin S-Video (Y/C) Mini Din sockets at
rear.
Mini internal Speaker, on Left side.
Controls:
On / Off slide switch on Right side.
Normal / Reverse (Mirror Image) slide switch at rear.
Channel Select & Auto Switching slide switch at rear.
Switching Dwell rotary control at rear.
Brightness rotary control on Right side.
Colour rotary control on Right side.
Volume rotary control on Right side.
Power Requirements: 10 ~ 26 VDC
Dimensions:
~ 174 mm (W) ~ 125 mm (H) ~ 46 mm (D)
Weight ~ 600 grams
Supplied with:
Adhesive Bracket (for attachment to rear) with Swivel & Tilt joint, L-Shaped
Slotted Dash type mounting bracket, 4 pin plug with wires for Automotive Power
Supply & Reverse Switch input, Automotive Cigarette Lighter Plug with Coiled
Cable & 2.1 x 5.5 mm DC Plug.
Click here for RearView-M4.5
Automotive Rear View Monitor & Waterproof Camera monochrome 4.5 inch display
Use your Browser "Back
Button" to return to previous page
BUNDLED-PAKS
'exceptional value' completely DIY Plug-In installation click here
for details.
